|Group||Compact Servo Roller Feeder|
|Min. Order||1 set|
|Terms of Payment||L/C, T/T|
|Decoiler||Hydraulic Expansion, Motorized, Automatic|
|Straightener||Gear drive, servo motor|
|Servo Feeder||Yaskawa Driver and Yaskawa Motor|
|Oiling Machine||To lubricate and cool down the coil sheet, prolongs the lifespan of dies|
|Shearer||To cut off coil threads|
|Coil Weight||Up to 15 tons weight|
|Coil Width||100-1600 mm wide|
|Coil Thickness||0.2-3.2 mm thick high tensile|
|Rollers quality||Material :GCr15 high quality bearing material. Thickening plating and Grinding processing. Hardness: HRC60-65|
|Coil Width(mm):||50~600||Strip Thickness(mm):||0.2~3.2|
|Line Speed(m/min):||16~24||Coil Weight(Kg):||3000/5000|
|Straightening Rollers Number(Pcs):||Upper 6/lower 5||Main Motor(Kw):||AC 4.5|
|Warranty Period:||12 Months|
Automobile coil die stamping, roller feeder, stamping automatic feeding
The punch feeders used in continuous stamping production mainly include air, roller and NC feeder. Although the air feeder is low in price, it is gradually eliminated by the market due to its high failure rate, low precision and high maintenance cost.
Although the NC feeder has stable performance and convenient operation, it is relatively high in price because it needs to be fed by a servo motor, and it cannot be accepted by most customers.
At this time, the roller feeder has become the most used feeding equipment in the stamping industry due to its high precision, low failure, easy maintenance and no additional energy consumption.
In actual use, fix the roller feeder with the mounting plate on the side center of the die on the punch table, and fix the relaxation device on the slider so that the loosening screw just presses on the extension bracket.
The eccentric disk is mounted on the output shaft of the punching machine with the eccentric disk fixing seat, and then the connecting rod, the rocker arm and the body are installed. According to the width and thickness requirements of the material, the material thickness, feeding time, and distance of the roller feeder are Relax and adjust.
Then, after the inching test and the single-action test, the high-precision continuous automatic production can be performed.
|Max. Line Speed(m/min)||16-24||16-24||16-24||16-24|
|Work Roll Number(pieces)||upper 6|
|Feed Roll Number(set)||1||1||1||1|
|Power(V)||3 Phase 220V/380V/50HZ|
|Strip Thicknees (mm)||Coil Width (mm)|
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provided