|Group||Metal Strip Straightener|
|Min. Order||1 set|
|Terms of Payment||L/C, T/T|
|Metal sheet thickness||0.5-4.5 mm thick|
|Suitable material||Steel, gi, cr, hr, other metal materials|
|Straightening speed||0-16 m/min|
|Metal sheet width||50-600 mm wide|
|straightener rollers||diameter 70 mm * 9 pcs|
|pinch rollers||diameter 95 mm * 2 pcs|
|Roller Pressure||Pneumatic rods|
|Roller adjustment||Eccentric turbine worm adjusting|
|power||7.5 HP / 5.6 kW|
|Inverter||Delta Brand, from Taiwan|
1) This is a special designed straightener for medium thick products that need improving the high precision punching treatment. As we all know, coil materials can not produce good products without the flattening and stress relieving treatments; therefore, the performance of the straightener is critical in the production process.
2) The flattening and the straightening secondary wheels adopt the imported SUJ2, milling after HRC60°heat treatment and starts production after plating the hard chrome to ensure evenness of the chrome layers and the form tolerances of each bearing.
3) The flattening adjusting adopts floating four-point balancing equipment, with the dial indicator, which can find the leveling point rapidly.
4) Adopts the cardan joint and the gear transmission, suitable for straightening high precision requirement products.
5) Except the straightening roller the additional feeding wheel improves the punching precision.
6) Adopts the high precision axis, and the additional lubrication system prolongs machine life span.